Discount Security Cameras & Electronics Wholesaler,
Free worldwide Shipping.

Description

Brand new IDE to SATA Bilateral Connector Converter Adapter

• Easy to install and no driver is required
• Bi-Directional SATA to IDE Adapter for serial and parallel ATA. This adapter Does-it-All
• IDE to SATA Adapter or SATA to IDE Converter.
• This is a bi-directional converter for serial and parallel ATA translation.
• It includes the serial ATA PHY, Link, Transport, and Parallel ATA (Application Layer) controller.
• The serial ATA Physical, link and transport layers are complaint to Serial ATA 1.0.
• This IDE to SATA Converter supports a 1.5Ghz data rate.

Features:

• With LED indicated power
• Serial ATA 1.0 Specification Compliant
• Automatic Serial ATA 1.5 Gbps Speed Negotiation
• ATA/ATAPI PIO mode 0 to 4
• ATA/ATAPI PI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150 Mbps
• ATA/ATAPIPI LAB48 addressing mode associated with 2-byte sector count
• Support Serial ATA hot-plug
• Ultra Low power consumption
• Work for both AC and DC couple between the transmitter and receiver
• Provide specified OOB signal detection and transmission
• Support spread spectrum clocking to reduce EMI
• Support partial/slumber power management
• Provide adjustable TX signal amplitude and pre-emphasis level
• Slave support
• Note: It is only suitable for SATA HDD and IDE HDD, it can Not support DVD driver and other storage devices!

Package:

• 1 x IDE to SATA or SATA to IDE Bilateral Converter Adapter
• 1 x 4 pin power cable
• 1 x SATA cable